Series vs parallel circuits: current, voltage and resistance

Resistors in series carry the same current because they share one unbranched path; their voltage drops add. Resistors in parallel share the same voltage because they connect across the same two nodes; their branch currents add. Series resistances add directly, while parallel resistances combine through reciprocals. Identify the connections first, then apply Ohm's law to the relevant resistor or combination.

Two resistors drawn beside each other are not necessarily in parallel. In a circuit question, the wires determine the relationship, not the arrangement on the page.

Start with the connections

A node is a set of points connected by ideal wire with no intervening component. For two resistors to be in parallel, each must connect across the same pair of nodes. For series, their shared junction must offer no alternative current path.

FeatureSeries resistorsParallel resistors
Shared quantityCurrent through each resistorVoltage across each branch
Quantity that addsVoltage dropsBranch currents
Equivalent resistanceR = R₁ + R₂ + …1/R = 1/R₁ + 1/R₂ + …
Positive-resistance checkLarger than either individual resistorSmaller than the smallest branch resistance

These rules follow from conservation of charge and energy. OpenStax explains the connections and equivalent resistances.

The original examples below assume steady direct current, ideal wires, an ideal constant-voltage source and resistors whose resistance remains constant.

The same two resistors in series

Connect 4 Ω and 8 Ω in series across 12 V.

  1. Total resistance: 4 + 8 = 12 Ω.
  2. Circuit current: I = V/R = 12/12 = 1 A.
  3. Voltage across 4 Ω: V = IR = 1 × 4 = 4 V.
  4. Voltage across 8 Ω: V = IR = 1 × 8 = 8 V.

The voltage drops add to the supplied 12 V. Both resistors carry 1 A; the second does not receive a smaller current because the first has “used some up”. Energy is transferred in the resistors, while charge continues around the circuit.

A tempting wrong answer is 3 A through the 4 Ω resistor. That calculation puts the entire supply voltage across one component, even though the series pair shares it.

Now connect them in parallel

Put the same 4 Ω and 8 Ω resistors across the same 12 V source, each on its own branch.

  • Current through 4 Ω: 12/4 = 3 A.
  • Current through 8 Ω: 12/8 = 1.5 A.
  • Total supplied current: 3 + 1.5 = 4.5 A.
  • Equivalent resistance: 12/4.5 = 8/3 Ω, approximately 2.67 Ω.

That equivalent resistance is below 4 Ω, as expected. Equal branch voltage has not produced equal branch current: the lower-resistance branch carries more.

Adding a further positive-resistance parallel branch would reduce the equivalent resistance again. At fixed supply voltage, total current would rise; the voltage across the existing branches would remain 12 V. A real battery’s internal resistance can change that last conclusion, which is why the ideal-source assumption matters.

The power trap: what stays constant?

For a resistor, P = VI = I²R = V²/R. The expressions agree, but they emphasise different constraints. OpenStax derives these power relationships.

In the series example, both resistors carry 1 A. Their powers are 4 W and 8 W: the larger resistance dissipates more power.

In the parallel example, both have 12 V across them. Their powers are 36 W and 18 W: the smaller resistance dissipates more power.

“Higher resistance means higher power” is therefore incomplete. Ask whether voltage or current is held fixed before reasoning from a formula. For real lamps, temperature-dependent resistance makes a simple fixed-resistance model only an approximation.

Self-check: combine branches before the final series step

An original practice circuit has a 3 Ω resistor in series with a parallel pair of 6 Ω and 6 Ω, connected to an ideal 9 V supply.

Find the total current and each branch current.

The parallel pair is 3 Ω, making the total 6 Ω. Total current is 9/6 = 1.5 A. The first resistor drops 4.5 V, leaving 4.5 V across the parallel pair. Each branch carries 4.5/6 = 0.75 A; together they carry the original 1.5 A.

The reliable order is identify nodes → simplify a combination → find total current → work back to each component. For another example of why a fixed quantity changes a comparison, read proportionality and graph scales.

Sources

Or keep going in the iPhone app.

Found a mistake? Write to hello@imatlearn.com